Home
Features
Removes 100% of dissolved and entrained gases
Removes solids larger than 5 μm
Restores flash point and viscosity to as-new or better conditions
Removes acidity with the removal of water
Applications
Transformer oil
Hydraulic oil
Lubrication oil
Synthetic oil
Fuel Oil
Description
The Allen Oil Conditioner (AOC) is used to dehydrate, degasify,
and purify insulating, lubricating, hydraulic, mineral,
and synthetic oils that are used all over the world.
The AOC uses vacuum, heat, and particulate filtration to
purify these oils by removing solid particulates down to
ISO 14/13/10 and removing 100% of dissolved and entrained
gases down to 5 wppm. The AOC restores the
flashpoint and the viscosity of the oil to as-new or better
conditions. The on-board programmable logic controlled
alarms and user interface make it simple to operate and
easy to maintain. The AOC reduces downtime, improves
longevity of the oil and the equipment it purifies, and lowers
the total cost of ownership over the life of both the
oil and equipment. The AOC holds the highest removal of
water on the market making the AOC the gold standard
when it comes to providing purification solutions for your
major investments.
AOC Specifications
Width |
36–120 in
|
||||
Height |
72–192 in
|
||||
Length |
72–480 in
|
||||
Weight |
1,500–7,500 lb
|
||||
Flow Rate |
100–4,000 gal/hr
|
||||
Water Removal |
> 5 wppm |
||||
Particulate Removal |
> 5 μm |
||||
Dissolved and Entrained Gas
|
100% |
||||
Pump |
Heavy-duty, positive
|
||||
Vacuum Pump |
5–15 ft3/min (0.1–0.4 m3/min)
|
||||
Power Supply |
|
||||
Operating Temperature |
160–180°F
|
||||
Operating Pressure |
30–250 psi
|
||||
Inlet Connections |
NPT or RF flanged |
||||
Outlet Connections |
NPT or RF flanged |
||||
Controls Interface |
Solid state programmable logic controller |
||||
Safety Shutdown Alarms |
|
||||
System Gauges & Indicators |
|
||||
Code Construction |
ASME |
Request A Quote
